Bubble area wide

Few days ago while waiting the "main" target to pass meridian I took few images of the famous Bubble nebula area (NGC7635). The image is only 30min of Hydrogen Alpha (6*300sec) and binned 2*2, but the main thing is that I took them unguided. So again points to MesuMount2!!

The picture has not so much of details because of binning but instead quite a nice wide view of the area. About the center is SH2-157, little bit down and left is Bubble Nebula and M52 beside it and the left large nebula is designated SH2-161. There's also SH2-158, SH2-159 and NGC7510 in the image.

MesuMount's performance

The mount is stunning! Some more adjustment and FINALLY realized to put the "simple auto-dark" on of the MaximDL. Here's the result:

The scale of the error graph on the upper right corner is ±0.5 pixels. And as you can see the 3 minute RMS error is 0.029 and 0.059 pixels... Unbelievable! Ok, the focal length of the APM is only 500mm, but still.

LBN550, LBN552, LBN555 and LDN1228

Again some rarely imaged parts of the sky. Northern part of constellation Cepheus has this pretty nice looking bright nebula, LBN 552.

I had less than 6 hrs of total exposure so I'm not quite satisfied with this yet but no can do! Moon is groving again and the dark time is decreasing rapidly. There's not even a month to go with this season...

Here's LLRGB image with 5h 45min of exposure (L= 17*900sec, RGB=3*600sec bin2*2).

LDN1235 and Vdb149+Vdb150

Finally some serious imaging!

Few clear nights so aimed my system to constellation Cepheus.

The dark part of the image is LDN1235. Blue reflection nebulaes are objects of the van den Bergh's catalog. The one in the left is Vdb149 and the other Vdb150.

i had some minor problems during this session. First night I had USB port failure after 4 hrs and the other night I modified the CCDCommander imaging script I forgot to check the timing. So everything worked well but because of my mistake the script ended about two hours before dawn. But no can do...

Here's 7hr 45min of LRGB exposures (L=19*900sec bin1*1, RGB=10*450 sec bin2*2).

Adjusting the guider settings

The moon is starting to affect on imaging so I used about an hour to adjust the autoguider settings.

First I used 3 sec unbinned exposures and wondered how the tracking error was about 0.6 to 0.8 pixels. Then I realized that one noisy pixel on the edge of the guide star made the difference. After that I changed to 8 sec exposures and noticed that the error graph changed dramatically with lower noise (or with better SNR). After some fine adjustments of the guider aggressiveness I got the unbinned guider error below 0.5 pixels which is enough for my setup (STL pixel size vs. internal guide chip pixel size).

Finally I changed 2*2 binning to the guider and started to use 5-6 sec exposures and got tracking error to about 0.2 pixels.

This kind of graph I've never seen on my previous EQ-5/6 mounts... So no worries of the mounts performance for this small scope!!

First proper testing of equipment

FINALLY!! After almost two months of clouds and rain there was a clear night!

It took about an hour to align the mount, calibrate the autoguider and make some V-curves for the FocusMax but then was time to start imaging. Everything started to work without a single problem and I was quite relieved. Mount was guiding smoothly (error below 0.3 pixels with internal guider's chip and unbinned).

I aimed the system towards NGC7023 in Cepheus. Took some Luminance and then RGB-channels. But, as usual, the fog came and stopped me after about 4 hours.

Here's LRGB image with about 4hrs of exposure (105:50:50:50 min). L unbinned and RGB binned 2*2.

Here's about the full frame.

Here's cropped version

I'll need to take much more Luminance to dig out those darker parts. So there's more to come...

My APM's original focuser was crying trying to carry all the weight of the STL. And it really can't handle it so I've already waiting for Feather Touch's focuser.

Minor progress

Weather has been really awful! During last month there has been two nights with clear sky for longer than 15 minutes.

First one I got the mount polar aligned. I used PAM (polealignmax) which is really easy, fast and precise way to do it. After four runs I had error less than 1 arcsec.

But I noticed that the virtual COM-ports are not so handy to use! When I needed to switch mount control from PAM to MaximDL, I'd had to shut down both programs before I could use the other one. If I tried to disconnect one and connect to another there was an error with the driver. weird...

Last night was the second clear night, but there was a huge storm which cut down the electricity for my observatory too...