One of my "main" targets during last few months. First exposures was taken at the end of October so it took more than a month to finalize this one.
The Crescent Nebula (also known as NGC 6888, Caldwell 27, Sharpless 105) is an emission nebula in the constellation Cygnus, about 5000 light-years away. It was discovered by Friedrich Wilhelm Herschel in 1792.[2] It is formed by the fast stellar wind from the Wolf-Rayet star WR 136 (HD 192163) colliding with and energizing the slower moving wind ejected by the star when it became a red giant around 250,000 to 400,000[citation needed] years ago. (wikipedia)
This is a mag 7,4 object. Here's almost 8 hrs of data at HaRGB.
Exposures:
Ha = 3*1800" + 8*1200" (bin1*1)
R = 14*360" (bin2*2)
G = 11*360" (bin2*2)
B = 11*360" (bin2*2)
Full size on Astrobin
17 Dec 2015
13 Dec 2015
NGC-891
NGC 891 (also known as Caldwell 23) is an edge-on unbarred spiral galaxy about 30 million light-years away in the constellation Andromeda. It was discovered by William Herschel on October 6, 1784. The galaxy is a member of the NGC 1023 group of galaxies in the Local Supercluster. It has an H II nucleus. (wikipedia)
Here's only color channels binned 2*2. This was a morning target for few of my imaging sessions so there's no luminance channel, yet. If the weather some day clears I've planned to continue with this one.
Only 2 hr 12 min of rgb here (42:60:30 bin2*2 all).
Here's only color channels binned 2*2. This was a morning target for few of my imaging sessions so there's no luminance channel, yet. If the weather some day clears I've planned to continue with this one.
Only 2 hr 12 min of rgb here (42:60:30 bin2*2 all).
Tunnisteet:
Astrograph,
Galaxy,
MesuMount2,
STL11000xm
8 Apr 2015
Draco Trio reprocessed
More reprocessing done!
Here's another one shot in 2013, original post and image can be found here.
Full size on Astrobin
Here's another one shot in 2013, original post and image can be found here.
Full size on Astrobin
Tunnisteet:
Astrograph,
Galaxy,
MesuMount2,
STL11000xm
7 Apr 2015
Ngc2685 reprocessed
Had some time to get back to reprocess one of my old images. This was shot in early 2013. (original post here.)
And 100% crop of the galaxy:
Full size on Astrobin
And 100% crop of the galaxy:
Full size on Astrobin
Tunnisteet:
Astrograph,
Galaxy,
MesuMount2,
STL11000xm
29 Mar 2015
IC356
This was my early-night target before Ngc3184. Unfortunately this drops low pretty fast after darkness so I got only 2-3 hrs of data during a night. And there was only two clear nights...
This galaxy is a relatively nearby, located only 39 million light years away. It's located quite close to IC342 in the constellation Camelopardalis. IC356, also known as Arp213, has a magnitude of 11.39.
Here's 5h 30min of exposure.
L = 16 * 900" (bin1*1)
RGB = 6 * 300" (bin2*2)
Full size in Astrobin.
Tunnisteet:
Astrograph,
Galaxy,
MesuMount2,
STL11000xm
23 Mar 2015
Ngc3184
At least one image for this season done!!!!
I missed almost two weeks of clear weather mainly because I noticed a minor flexure on my PDF focuser and wanted to fix it right away. Waited to got a longer extension plate to get camera closer to focuser. And I think it helped a bit because I didn't notice any flexure this time.
Here's the Ngc3184, a spiral galaxy in the constellation Ursa Major. It lies about 40 million light years away and has a magnitude of 10.4.
In the down right part of the image is galaxy cluster Abell 971.
Total exposure is 6 h 40 min.
L = 17*900"
R = 12*300" (bin2*2)
G = 9 *300" (bin2*2)
B = 10*300" (bin2*2)
Full size in Astrobin
Tunnisteet:
Astrograph,
Galaxy,
MesuMount2,
STL11000xm
19 Feb 2015
FINALLY!!! Some imaging done...
This season has been a real nightmare for BBubble Observatory!! As written earlier my Mesu2 broke and after that my FLI PDF focuser failed...
They finally respond to my emails from FLI and requested focuser to be sent back there for repair. Just to send it there would have cost me almost 200€... And basically, the problem was that the motor drive sprocket was loose. So I respond the email and requested help for opening the focuser at home and tightening the drive sprocket, No one from the FLI responded me anymore... So nothing good for me to say on that company!!
So finally I decided to open the focuser despite the warning not to do so in the manual! The whole operation took me about an hour. And the most time I spend was adjusting the focuser to be straight before attaching everything.
So earlier this week there was also a good weather with no moon. First few hours of collimation and then taking images. Imaged three different targets with RGB-filters and managed to collect about 60 min per channel per target.
I Sat down yesterday to process them. All channels was looking pretty good after calibration and then I started to combine them to color images. But what the hell, all stars are white... As well as the nebulosity in the NGC1579, WTF!!!!
Ok, first impression: all different images were taken in the same filter. So is my filter wheel now broken or what!?! During imaging session the filters were changing in the MaximDL and all was ok when I tested the drives after re-installing my PC after its hard drive crash few month ago.
I went inside the observatory and changed the filter from the MaximDL and nothing happened except in the MaximDL camera view, great... I re-powered the camera and noticed that the wheel was testing itself normally, so at least it was not broken!! Started the CCDOPS and tested the filter wheel, all working perfectly! So it must be the MaximDL... Checked filter wheel options, I had selected "CFW-8" because I have 8-slot filter wheel. Selected "standard" and the wheel started to move as it should.
Luckily all the images was taken in the L-filter so now I'm missing only RGB-data!! So here's what I get in the L-Channel:
NGC3184:
NGC2419, The Galactic Wanderer
NGC1579, The Northern Trifid,
They finally respond to my emails from FLI and requested focuser to be sent back there for repair. Just to send it there would have cost me almost 200€... And basically, the problem was that the motor drive sprocket was loose. So I respond the email and requested help for opening the focuser at home and tightening the drive sprocket, No one from the FLI responded me anymore... So nothing good for me to say on that company!!
So finally I decided to open the focuser despite the warning not to do so in the manual! The whole operation took me about an hour. And the most time I spend was adjusting the focuser to be straight before attaching everything.
So earlier this week there was also a good weather with no moon. First few hours of collimation and then taking images. Imaged three different targets with RGB-filters and managed to collect about 60 min per channel per target.
I Sat down yesterday to process them. All channels was looking pretty good after calibration and then I started to combine them to color images. But what the hell, all stars are white... As well as the nebulosity in the NGC1579, WTF!!!!
Ok, first impression: all different images were taken in the same filter. So is my filter wheel now broken or what!?! During imaging session the filters were changing in the MaximDL and all was ok when I tested the drives after re-installing my PC after its hard drive crash few month ago.
I went inside the observatory and changed the filter from the MaximDL and nothing happened except in the MaximDL camera view, great... I re-powered the camera and noticed that the wheel was testing itself normally, so at least it was not broken!! Started the CCDOPS and tested the filter wheel, all working perfectly! So it must be the MaximDL... Checked filter wheel options, I had selected "CFW-8" because I have 8-slot filter wheel. Selected "standard" and the wheel started to move as it should.
Luckily all the images was taken in the L-filter so now I'm missing only RGB-data!! So here's what I get in the L-Channel:
NGC3184:
NGC2419, The Galactic Wanderer
NGC1579, The Northern Trifid,
Tunnisteet:
Astrograph,
MesuMount2,
observatory,
STL11000xm
Subscribe to:
Posts (Atom)










